|
Elo Touchscreen
Drivers
|
| Windows 2000 |
|
MMW2KS.EXE
(290K) |
Version 1.00
of the MonitorMouse for Windows 2000 serial touchmonitor driver,
designed for use with Microsoft's Windows 2000. This first
release features a native 32-bit driver, new setup program,
updated Universal Control Panel (UCPL) and Video Alignment (VA)
program, uninstall utility, and diagnostic applications for use
with single Elo TouchSystems' touchmonitors. |
| Windows 98/2000 USB |
|
USB982K.EXE
(270K) |
Version 1.00
of the USB Tool for Windows 98 and Windows 2000. This first
release features a setup program, video alignment (Elo VA)
program, uninstall utility, 32-bit control panel program and is
compatible with all Elo TouchSystems' USB touchmonitors and USB
touchscreen controllers. This new driver replaces the current
USB Tool for Windows 98 (rev. 1.01). |
| Windows 95/98 |
|
MM95_201.EXE
(456K) |
MonitorMouse
for Windows 95/98, version 2.01. Includes a 32-bit driver and
Touchscreen Control Panel, as well as an easy-to-use Setup
program. See the README.TXT file after running the
self-extracting program. |
|
WIN95.TXT
(3K) |
Instructions
for installing the DOS and Windows Driver Disk, version 2.0c
(Windows 16-bit 3.x drivers) with Windows 95. These instructions
are also included in DWDSK.ZIP. See the !READ.ME! file.
NOTE: The 16-bit Windows 3.x drivers are only required for
Windows 95 if you will be using an old Elo touchscreen
controller (models E271-14x, E2x1-280, E281x-400x) or running
DOS programs in full screen mode. Otherwise, install
MonitorMouse for Windows 95 (32-bit drivers). Do not use a
combination of the 16-bit and 32-bit drivers. |
|
DIAGS.ZIP
(45K) |
Touchscreen
and controller diagnostic tools (run under DOS boot). Includes
BUSSTAT, COMDUMP, INFO, and SAWDUMP. Updated to work on 200+ Mhz
systems (fixes “divide-by-zero” message). |
| Windows NT |
|
MMNT310C.EXE
(927K) |
MonitorMice
for Windows NT 4.0, version 3.10c. See the README.TXT file after
running the self-extracting program. MonitorMice for Windows NT
supports up to 4 multiple monitors and contains a native, 32-bit
driver designed for Windows NT, a Setup program, an uninstall
utility, a 32-bit control panel program, and DOS-based
diagnostic applications for Elo TouchSystems’ touchmonitors
and current SmartSet serial touchscreen controllers.
NOTE: This driver does not support older PC-Bus controllers.
Download and use MMNT.EXE
(641K) with these older PC-Bus controllers. |
|
DIAGS.ZIP
(45K) |
Touchscreen
and controller diagnostic tools (run under DOS boot). Includes
BUSSTAT, COMDUMP, INFO, and SAWDUMP. Updated to work on 200+ Mhz
systems (fixes “divide-by-zero” message). |
| Windows CE |
|
WINCEX86.EXE
(640K) |
MonitorMouse™
for Windows CE 2.x, version 1.00. Includes touch driver,
calibration utility, application manual, and sample source code |
| DOS and Windows 3.x |
|
DWDSK.ZIP
(1011K) |
DOS and
Windows Driver Disk, version 2.0c-1 with all-in-one INSTALL
program. Includes MonitorMouse for Windows, MonitorMouse for
DOS, ELODEV, TouchBack, and ELODEMO. Includes updates from
20CFIX.ZIP. UnZIP onto a blank 3 1/2" HD floppy with
the -d flag: “PKUNZIP -d DWDSK a:”, then run A:INSTALL. |
| Macintosh |
|
MACMM31.SEA.HQX
(76K) |
MonitorMouse
for Macintosh, version 3.1. Supports E271-22xx and E281-23xx
serial controllers and E281-2303BX ADB controller. |
| Linux |
|
Linux
Driver
Installation |
Linux
drivers for Elo touchscreens are available in the public domain,
typically on Linux installation CDs or on various FTP sites such
as www.xfree86.org. These
Linux drivers are compatible with Elo AccuTouch E271-2210,
IntelliTouch E281-2310 and IntelliTouch 2500S controllers. Elo
TouchSystems is not responsible for the functionality of these
drivers. |
| OS/2 |
|
MMOS2.ZIP
(194K) |
MonitorMouse
for OS/2, version 2.2. Compatible with OS/2 2.x, Warp 3.0 and
4.0. PKUNZIP onto a blank floppy with the -d flag: “PKUNZIP -d
MMOS2 a:”. |
