Flair Standard Configuration

The Flair 1GHz. Touch Terminal - No O/S

Flair Standard Configuration	Flair with Optional MSR

Features
Fan-less, low power consumption	POS (Ultra Low Voltage) design of the device is embedded with a unique chip set and CPU renders power saving function.
Saving cost of ownership	Modular design provides the owner with the following benefits: (a) cost effectiveness, (b) customization flexibility, and (c) easy maintenance.
Compact size/ Aesthetic design	Slimmest in the POS industry standard (24 mm). This elegant, economic POS system features a sleek, compact design base that saves counter space and adds appeal to the service environment.
Dust/water-proof	Flair POS series features a highly durable, rigorously tested design that is reliable and dependable in rugged environments.
Environment protection	Environmental friendly, RoHS compliant product.
Higher stability	The Flair POS has a longer overall system MTBF to provide a higher stability during operation.

The Flair's Innovative Design:

The Flair has abundant I/O - Click on the graphics below to get an enlarged view:

The Flair with optional peripherals:

The Flair wall-mounted:

The Flair VESA Wall-mount Brackets:

Model number:	Flair 1Ghz
LCD & Touch Panel
LCD Panel	15” High Brightness TFT LCD Panel with LVDS Interface
Touch Panel	15” Resistive
System Configuration
CPU	1.5GHz.
Main Memory	SODIMM 200 Pin DDR2 RAM * 1 up to 1 GB.
System Chip Set	North Bridge: VIA CN-700
System Chip Set	South Bridge: VIA VT-8237R+
BIOS	Award BIOS With Enhanced ACPI 2.0 / PnP / APM / DMI / ESCD / PCI bus 2.1 / On Now / DRAM ECC
AGP 3D Graphics Port	-VIA S3 AGP, Share memory from 16 MB up to 64 MB
Input / Output Ports
Serial Port	Totally 6 * COM Port exposed
	DC 5V / 12V output on pin 9th by jumper selector. Each Voltage Output with Poly Switch Protector.
	COM 1 / 3: Exposed for RS-232 Device.( Upper Side,DB-9 Male connector )
	. COM 2 : Touch Panel I/F
	COM 4: Exposed for RS-232 Device.( Button Side,DB-9,Pro version only )
	COM 5: RS-232( Button Side, RJ-45,Pro Version only )
	COM 6: For Cash Drawer control ( Pro Version only, Selectable from exposed COM 6 DB-9 Connector )
Parallel Port	One LPT port (SPP/EPP/ ECP). IRQ and address selectable by BIOS setup. ( Pro Version Only )
FDD	None ( External USB FDD option )
Optical Device Driver	External USB type CD-ROM / COMBO / DVD R/W
USB	Totally 6 * USB port ( USB 2.0 ) support Windows 98/2000/XP/WePOS.

	* One standard USB port located at Front Panel Extend connector.

	* One USB port located at MSR Inter-connection Board for application.

	* Two standard USB port located at upper I / O area.

	* Two Powered USB ( One 5V and One 24V ) located at bottom I / O area
Enhance PCI IDE	On board PCI Bus Master IDE1/ 2 support Ultra DMA/33/66/100.( Four device )
S-ATA HDD Port	1 x S-ATA HDD Port on board
Powering System & Thermal
Thermal Solution	One Heat-sink for CPU & North Bridge Chip ( C7 2 GHz and Intel 852 GM Version with Speed controlled Fan )
Compact Flash Card	1 * Bootable Compact Flash Card Socket ( Type I/II , PATA Interface )
External Power Supply	DC 24V / 120W Sealed Power Adapter
External Power Supply	Fan-less DC 24V Sealed AT Type External sealed adapter . (UL, CSA, VDE, EMI meets FCC B). With Active PFC And OLP / OVP / OTP Function
AC Power Source	AC 90 to 264V Full Range.
Power On/Off Control	System bottom Side ATX Power trigger Switch.
Ethernet Port	-Realtek RTL-8100CL Ethernet Chips on Board ( 10 / 100 Base T )
(10/100 Mbs Auto)	-ACPI/NT4.0/5.0 (NDIS 5).
	-Remote Boot ROM for NT4.0.
	-Enable or Disable by BIOS setup.
Audio Port	-VIA VT1612A AC97 CODEC on board with Line In/ Line Out / MIC In.
Audio Port	( Line-Out exposed only )
PS/2 Keyboard Port	PS/2 type.
PS/2 Mouse Port	PS/2 type.
Physical Dimensions
System Size	380MM(L) * 280MM(W) * 360MM(H)--- system to fold minimum height: 230MM
Safety & Environment
Operation Temperature	0-40°C
Storage Temperature	-25-70°C
O/S Compatibility	DOS/OS2 V2.1/SCO XENIX: V2.3.2/SCO UNIX V3.2/NOVELL/ WIN 3.1/ 95/98/2000/XP/NT4.0.
Optional Device
Optional Device (FIMSK)	ISO Trick 1/2/3 Magnet Card Reader
	Smart Card Reader
	20 *2 VFD Customer Display
	Finger Print Sensor