|
1.5GHz. Flair All in One POS System
Specifications |
|
LCD & Touch Panel |
|
LCD Panel |
15” High Brightness TFT LCD Panel
with LVDS Interface |
|
Touch Panel |
15” Resistive Touch Panel (Fujitsu) |
|
System Configuration |
|
System Performance |
|
|
|
Intel Celeron-M 1.5 GHz CPU
with Speed controlled Fan |
|
Main Memory: |
SODIMM 200 Pin DDR1 RAM * 2 up to 2GB |
|
System Chip Set: |
North Bridge :Intel 852GM |
|
Operating System: |
WEPOS |
|
BIOS: |
Award BIOS With Enhanced ACPI 2.0 /
PnP / APM / DMI / ESCD / PCI bus 2.1 / On Now / DRAM ECC |
|
AGP 3D Graphics Port: |
Intel Graphics Core, |
|
|
Share memory from 8MB up to 64MB |
|
Input / Output Ports |
|
Serial Port: |
Totally 6 * COM Port exposed |
|
|
DC 5V / 12V output on pin 9th by
jumper selector. Each Voltage Output with Poly Switch
Protector. |
|
|
Arrange: |
|
|
COM 1/ 3: Exposed for RS-232 Device.(
Upper Side,DB-9 Male connector ) |
|
|
COM 2 : Touch Panel I/F |
|
|
COM 4: Exposed for RS-232 Device.(
Button Side,DB-9,Pro version only ) |
|
|
COM 5: RS-232( Button Side, RJ-45,Pro
Version only ) |
|
|
COM 6: For Cash Drawer control ( Pro
Version only, Selectable from exposed COM 6 DB-9
Connector ) |
|
Parallel Port: |
One LPT port (SPP/EPP/ ECP). IRQ and
address selectable by BIOS setup. |
|
HDD: |
80GB |
|
Optical Device Driver: |
External USB type CD-ROM / COMBO /
DVD R/W |
|
USB: |
Totally 6 * USB port ( USB 2.0 )
support Windows 98/2000/XP/WePOS. |
|
|
|
* One standard USB port located at
Front Panel Extend connector. |
|
|
|
* One USB port located at MSR
Inter-connection Board for application. |
|
|
|
* Two standard USB port located at
upper I / O area. |
|
|
|
* Two Powered USB ( One 5V and One
24V ) located at bottom I / O area. |
|
Enhance PCI IDE: |
On board PCI Bus Master IDE1/ 2
support Ultra DMA/33/66/100.( Four device ) |
|
Powering System & Thermal |
|
Thermal Solution: |
- One Heat-sink for CPU & North
Bridge Chip ( C7 2 GHz and Intel 852 GM Version with
Speed controlled Fan ) |
|
Compact Flash Card: |
1 * Bootable Compact Flash Card
Socket ( Type I/II , PATA Interface ) |
|
External Power Supply: |
DC 24V / 120W Sealed Power Adapter |
|
Fan-less DC 24V Sealed AT Type
External sealed adapter . (UL, CSA, VDE, EMI meets FCC
*B*). With Active PFC And OLP / OVP / OTP Function |
|
AC Power Source: |
AC 90 to 264V Full Range. |
|
Power On/Off Control: |
System bottom Side ATX Power trigger
Switch. |
|
Ethernet Port: |
Intel 82562GZ Ethernet Chip on Board |
|
|
|
|
(10/100 Mbs Auto) |
-Intel Ethernet Chips on Board |
|
|
( 10 / 100 Base T,) |
|
|
-ACPI/NT4.0/5.0 (NDIS 5). |
|
|
-Remote Boot ROM for NT4.0. |
|
|
-Enable or Disable by BIOS setup. |
|
Audio Port: |
-Realtek ALC 655 AC97 CODEC on board
with Line In/ Line Out / MIC In. |
|
|
( Line-Out exposed only ) |
|
PS/2 Keyboard Port: |
PS/2 type. |
|
PS/2 Mouse Port: |
PS/2 type. |
|
Physical Dimensions |
|
System Size : |
380MM(L) * 280MM(W) * 360MM(H)---
system to fold minimum height: 230MM |
|
Safety & Environment |
|
Operation Temperature: |
0C to 40C |
|
Storage Temperature: |
-25C to 70C |
|
O/S Compatibility: |
DOS/OS2 V2.1/SCO XENIX: V2.3.2/SCO
UNIX V3.2/NOVELL/ WIN 3.1/ 95/98/2000/XP/NT4.0. |
|
Optional Device |
|
Optional Device (FIMSK): |
ISO Track 1/2/3 Magnet Card Reader |